Korean Engish

지속가능 공정기술 연구센터

Center of Sustainable Process Engineering

CoSPE
 논문/특허/과제

     논문
     특허
     수행중인과제
     완료과제
        

● 논 문


2020
 

1. Bae K, Go GS, Noh NS, Lim Y-I, Bae J, Lee DH (2020). Bubble characteristics in pressurized bubble column associated with micro-bubble dispersion. Chemical Engineering Journal, 386, 121339.


2. Truong Xuan Do, Rana Mujahid, Hyun Soo Lim, Jae-Kon Kim, Young-Il Lim*, Jaehoon Kim* (2020), Techno-economic analysis of bio-heavy oil production from sewage sludge using subcritical and supercritical water, Renewable Energy, 151(5), 30-42.


3. Thang Toan Vu, Young-Il Lim*, Daesung Song*, Tae-Young Mun, Ji-Hong Moon, Dowon Sun, Yoon-Tae Hwang, Jae-Goo Lee, Young Cheol Park (2020), Techno-economic analysis of conventional and oxy-combustion power plants with and without CO2 capture and storage, Energy, 194(3), 116855.


4. Son Ich Ngo, Young-il Lim* (2020), Multi-scale Eulerian CFD of chemical processes: A review, ChemEngineering, 4(2), 23.


5. Son Ich Ngo, Young-Il Lim*, Doyeon Lee, Kang Seok Go, and Myung Won Seo* (2020), Flow behaviors, reaction kinetics, and optimal design of fixed- and fluidized-beds for CO2 methanation, Fuel, 275(9),117886.


6. Bay Van Tran, Son Ich Ngo, Young-il Lim*, Dong Hyun Lee, Kang-Seok Go, and Nam-Sun Nho, Hydrodynamics and simulation of air-kerosene bubble column at elevated pressure, Chinese Journal of Chemical Engineering, in press.


2019
 

1. Thuy Thi Le, Son Ich Ngo, Young-Il Lim*, Chi-Kyun Park, Byung-Don Lee, Byung-Gook Kim, and Dong-Ha Lim (2019), Effect of simultaneous three-angular motion on the performance of an air–water–oil separator under offshore operation, Ocean Eng., 171, 469-484.


2. Son Ich Ngo, Young-il Lim,*,Woohyun Kim, Dongju Seo, and Wang Lai Yoon, Computational fluid dynamics and experimental validation of a compact steam methane reformer for hydrogen production from natural gas, Applied Energy, 236, 340-353.


3 .Dan Duc Nguyen, Son Ich Ngo, Young-il Lim*,Woohyun Kim, Dongju Seo, and Wang-Lai Yoon (2019), Optimal design of sleeve-type compact steam methane reformer for hydrogen production from natural gas, Int. J. Hydrog. Energ., 44, 1973-1987.


4. Hung H. Pham, Son I. Ngo, Young-il Lim* and Yun-Hyuk Bang (2019), Computational fluid dynamics and tar formation in a low-temperature carbonization furnace for the production of carbon fibers, Journal of Industrial and Engineering Chemistry, 73, 286-296.


5. Son Ich Ngo, Young-Il Lim*, Soo-Chan Kim (2019), Wave characteristics of coagulation bath in dry-jet wet-spinning process for polyacrylonitrile fiber production using computational fluid dynamics, Processes, 7(5), 314.


6. Truong X. Do, Hermawan Prajitno , Young-il Lim*, and Jaehoon Kim* (2019), Process modeling and economic analysis for bio-heavy-oil production from sewage sludge using supercritical ethanol and methanol, Journal of Supercritical Fluid, 150, 137-146.


7. Bay Van Tran, Dan Duc Nguyen, Son Ich Ngo, Young-Il Lim*, Dong Hyun Lee, Kang-Seok Go and Nam-Sun Nho (2019), Hydrodynamics and simulation of air-water bubble column under elevated pressures, AIChE Journal, 65(10), e16685,Oct. 2019.


2018
 

1. Truong Xuan Do, Young-il Lim*, Hyodeuk Cho, Jaehui Shim, Jeongkeun Yoo, Kyutai Rho, Seong-Geun Choi, Chanwoo Park, Byeong-Yun Park (2018), Techno-economic analysis of fry-drying and torrefaction plant for bio-solid fuel production, Renewable energy, 119(4), 45-53.


2 Hung H. Pham, Young-Il Lim*, Sungu Han, Bosup Lim and Hyun-Shin Ko, Hydrodynamics and design of gas distributor in large-scale amine absorbers using computational fluid dynamics, Korean J. Chemical Engineering, 35(5), 1073–1082.


3. Son Ich Ngo, Young-Il Lim*, Moon-Heui Hahn, and Jaeho Jung (2018), Prediction of degree of impregnation for thermoplastic unidirectional carbon fiber-reinforced composite by multiscale computation fluid dynamics (CFD), Chemical Engineering Science, 185, 64-75.


4. Chang-ho Oh and Young-Il Lim*(2018), Process simulation and economic analysis of fast pyrolysis and hydro-processing biooil production process from sawdust, Korean Chem. Eng. Res., 56(4), in press.


5. Thuy T. Le, Young-il Lim*, Chi-Kyun Park, Byeong-Don Lee, Byeong-gook Kim, and Dong-Ha Lim (2018), Three-phase Eulerian computational fluid dynamics (CFD) of air-water-oil separator under off-shore operation, J. Petroleum Sci. Eng., accepted.


2017
 

1. Truong Xuan Do, Young-il Lim*, Hyodeuk Cho, Jaehui Shim, Jeongkeun Yoo, S.K. Choi, and Byung-Yoon Park (2017), Process modeling and energy consumption for fry-drying and torrefaction of organic solid waste, Drying Technology, 35(6), 754-765.


2. Son I. Ngo, Young-il Lim*, Moon-Heui Hahn, Jaeho Jung and Y.H. Bang (2017), Multi-scale computational fluid dynamics of impregnation die for thermoplastic carbon fiber prepreg production, Computers & Chemical Engineering, 103, 58-68.


3. Jeongeun Kim, Dung A. Pham, Young-Il Lim* (2017), Effect of gravity center position on amine absorber with structured packing under offshore operation: Computational fluid dynamics approach, Chemical Engineering Research and Design . 121, 99-112.


4. Hung H. Pham, Young-il Lim*, Chul-Ho Cho, and Yun-Hyuk Bang (2017), Hydrodynamics of low temperature carbonization furnace for production of PAN-based carbon fiber, Chemical Engineering Research and Design, 128, 192-204.


5. Young-Il Lim*, Thuy T. Le, Chi-Kyun Park, Byeong-Don Lee, Byeong-gook Kim, and Dong-Ha Lim (2017), Three-phase Eulerian computational fluid dynamics (CFD) of air-water-oil separator with coalescer, Korean Chem. Eng. Res., 55(2), 201-213.


2016
 

1. Truong X. Do, Young-Il Lim*, Jinsuk Lee, and Woojo Lee (2016), Techno-economic analysis of retrofit petrochemical complex by simulated moving-bed, Chemical Engineering Research and Design, 106, 222-241.


2. Truong Xuan Do and Young-il Lim* (2016), Techno-economic comparison of three energy conversion pathways from empty fruit bunches, Renewable Energy,90, 307-318


3. Jeongeun Kim, Dung A. Pham, and Young-Il Lim* (2016), Gas-liquid multiphase computational fluid dynamics (CFD) of amine absorption column with structured-packing for CO2 capture, Computers & Chemical Engineering, 88, 39-49


4. Young-Il Lim, JinSoon Choi, HeungMan Moon, and Kooki Kim (2016), Techno-economic Comparison of Absorption and Adsorption Processes for Carbon Monoxide (CO) Separation from Linze-Donawitz Gas (LDG), Korean Chem. Eng. Res., 54(3), 320-331


2015
 

1. Truong X. Do, Young-Il Lim*, Jinsuk Lee, and Woojo Lee (2015), Effect of normal paraffins separation from naphtha on reaction kinetics for olefins and aromatics production, Comput. Chem. Eng., 74, 128-143 (March 4, 2015). 


2. Son Ich Ngo, Young-Il Lim*, Byung-Ho Song, Uen-Do Lee, and Jae-Hun Song (2015), Effects of fluidization velocity on solid stack volume in a bubbling fluidized-bed with nozzle-type distributor, Powder Technology, 275, 188-198.


3. Dung A. Pham, Young-Il Lim*, Hyunwoo Jee, Euisub Ahn, and Youngwon Jung (2015), Porous media Eulerian computational fluid dynamics (CFD) model of amine absorber with structured-packing for CO2 removal, Chem. Eng. Sci, in press.


4. Truong X. Do, Young-Il Lim*, Jinsuk Lee, and Woojo Lee (2015), Techno-economic analysis of retrofit petrochemical complex by simulated moving-bed, Chemical Engineering Research and Design, submitted.


5. Truong Xuan Do, Young-il Lim*, Sungsoo Jang, Hwa-Jee Chung, and Yong-Wook Lee (2015), Hierarchical economic potentials for techno-economic evaluation applied to bioethanol production from palm empty fruit bunches (EFB), Bioresource technology, 189, p224-235.


2014
 

1. Truong X. Do, Young-Il Lim*, and Heejung Yeo (2014), Economic analysis of bio-oil production process from empty fruit bunches, Energy Conversion and Management, 80, 525-534.


2. Truong Xuan Do, Young-il Lim*, Heejung Yeo, Uen-do Lee, Young-tai Choi, and Jae-Hun Song (2014), Techno-economic analysis of power generation plant with fluidized-bed gasification from woodchips, Energy, 70, 547-560.


3. Young-Il Lim*, and Uen-Do Lee (2014), Quasi-equilibrium thermodynamic model with empirical equations for air-steam biomass gasification in fluidized-beds, Fuel Processing Technology, 128, 199-210.






주소:(456-749) 경기도 안성시 중앙로 327(석정동) 한경대학교 산학협력관 412-2호 CoSPE
전화: 031 678 4705, 팩스: 031 670 5209, 이메일: limyi@hknu.ac.kr                
Copyright 2015 CoSPE All Rights Reserved